• 作者:
• 来源:
• 日期: 2022-05-05
• 浏览次数: 1462次

Uhf electronic tags are generally divided into four areas:

(Reserve) : address: 0-3;Address: 0-1 stores 32bit kill password (kill), default: 00 00 00 00 00;

Store 32bit Access password (Access), default: 00 00 00 00.

When the region is not accessed or killed, the data in the region can be rewritten at will.

[EPC area] : address: 2-7;Store the 96bit ID number, which is the area where the data that is normally read by our device is stored.When the region is not accessed or killed, the data in the region can be rewritten at will.

TID(sector TID) : address: 0-5;Stores a unique and unrewritable ID number of 96bit globally.

[User(User area)] : address: 0-31;Store 512 bits of data.By default, each address is: 00, 00. When the region is not encrypted or encrypted, the data in the region can be rewritten at will.

All the above areas are illustrated with the commonly used label chip Alien H3 as an example.Different chip, corresponding area data and actual function may be different

To read the USER zone data, you are advised to look at the EPC protocol first. The basic operations of EPC are read, write, lock, and kill.

The protocol document is very detailed. In addition, if you are doing application development, you need to operate according to the API provided by each manufacturer, and you need to read the API functions of each manufacturer.

If you are developing the underlying baseband, you should be more familiar with the EPC protocol.