Feature Description

1,Based on Indy R2000 chip ◆ RF transceiver is Impinj Indy R2000. 2,High performance anti anti-collision algorithm ◆ The best algorithm in this industry. ◆ It provides the highest efficiency. 3,Optimized algorithm for a little of tags ◆ Better tag response time. ◆ Optimized for small tag quant ity applications. 4,Dual CPU architecture ◆ Main CPU is responsible for tag inventory, assistant CPU is responsible for data management. ◆ Inventory and data transfer are parallel and simultaneous. This feature improves the total performance significantly. ◆ Assistant CPU is responsible for generating real random number. ◆ Assistant CPU is responsible for system operating surveillance. 5,Fast 4 antenna switch inventory ◆ High speed inventory therefore antennas could be switched rapidly. The minimum inventory dur ation for an antenna is 25 ms. ◆ Every antenna’s inventory duration is configurable. 6,Two inventory modes ◆ Buffer mode and real time mode. ◆ In buffer mode, inventoried tag will be stored in buffer. This mode improves the efficiency of multi tag inventory. 7,Hardware system halt detection ◆ Hardware CPU status surveillance. ◆ Run for 24hours X 365 days without system halt. 8,Low operation voltage ◆ The lowest operating supply voltage is 3.7V. ◆ Can be powered by lithium battery. 9,Low power consumption ◆ Maximum o ut power only needs 1.3A +/ +/-10%. Current. 10,PA health surveillance ◆ PA status surveillance. ◆ Make sure PA never works under saturated state. Protected it for long term operation.

11,18000 -6B/C full compatible ◆ 100% 18000 18000-6B/C compatible. ◆ Can be switched r apidly between protocols. 12,18000 -6B large data read/write ◆ Read 216 bytes i n one time takes less than 500ms. ◆ Write 216 bytes i n one time takes less than 3.5s. ◆ Can also read/write data with various lengths. ◆ Extremely stable (approximate 100% success rate). 13,Antenna connection detection ◆ Detect antenna connection. ◆ Protect ing RF receiver receiver. ◆ Can be cancelled by command. 14,Bistatic antenna configuration ◆ Bistatic antenna configuration improves receive sensitivity by 13dB. 15,High power LED driver ◆ Can o utput 50mA output current to drive a high power LED. 16,Excellent onboard power system ◆ 8 independent power supplied on board. Every unit is supplied independently. ◆ Each power supply has soft start function. Improves the stability of the power supply system. 17,Multi-board temperature sensor ◆ Multi point surveillance, Accurate monitoring system operating temperaturetemperature. 18,Dual backup power output correction ◆ Make sure output power can be fine adjusted. ◆ Two mutually backup power parity modules. Unless also dam aged, the system can operate normally. 19,Concise and effective command system ◆ Serial communication interface. ◆ Simple, convenient and effective for easy integration. 20,Excellent thermal design ◆ All heating devices have thermal structure. ◆ A large area of heat sink contact surface. ◆ Thermal coupling interface using high thermal conductivity solid materials which are non non-volatile under high temperature.